You can add various temperature probes till iBLOPPER MATE. You can both use the header as connection or by cable though “Grove – servo splitter – 20cm – 5pcs“.
The temperature probe is mostly needed for the “iBLOPPER mode”. Especially, to make use of the Temperature Controll system, but if only using in connection with eHydrometers the temperature will come form either TILT, iSPINDEL or RAPT Pill.
The most suited is to use the cable connection and if you use”Grove – servo splitter – 20cm – 5pcs“. it is the white cable for the temperature signal. We have tested with the following: