Below you find info on how to install both M5 S3 Atom LCD and the Devkit ESP32 version. If you build an iBLOPPER MATE please consider Donate us!
How to Install
To install you need:
- Install Windows D2XX drivers if needed.
- Download the iBLOPPER MATE installer (see below). Run it.
- Press button on side of M5stack ATOM S3 for 2 sec, until it light green to set it in boot-loader mode.
- Select the USB PORT.
- Install by hitting “Burn” (after M5stack ATOM S3 has showed the green light on side) .
Please Notice, the erase function of the installer is disabled.
iBLOPPER MATE v.M5.2 for both "M5stack S3 Atom LCD" and for "ESP32 DevKit1" (205 downloads)Setup WiFi
The only thing you need to do in iBLOPPER MATE is to enter the WiFi credentials of your WiFi network. Please notice the iBLOPPER MATE number as you must use the number as your username when register your account at iBLOPPER CLOUD.
Register and login
You need to register your account at iBLOPPER CLOUD and you must use the iBLOPPER MATE number as shown above under Setup WiFI, eg “iBLOPPER CONNECT 8799914” and only this number as username can be used. Hence, I repeat: it must be the number your iBLOPPER MATE show, and you cannot use others number/usernames at all.
