Skip to content

Install/Setup

Below you find info on how to install both M5 S3 Atom LCD and LITE version. If you build an The iBLOPPER/SPINDELMATE please consider Donate us!

iBLOPPER/SPINDELMATE Installer.

How to Install

To install you need:

  1. Install Windows D2XX drivers if needed.
  2. Download the iBLOPPER MATE installer (see below). Run it.
  3. Press button on side of M5stack ATOM S3 for 2 sec, until it light green to set it in boot-loader mode.
  4. Select the USB PORT.
  5. Install by hitting “Burn” (after M5stack ATOM S3 has showed the green light on side) .

Please Notice, the erase function of the installer is disabled.

iBLOPPER_SPINDELMATE_v.M5.4Download

If you build an The iBLOPPER/SPINDELMATE please consider Donate us!

Setup WiFi

The only thing you need to do in iBLOPPER/SPINDELMATE is to enter the WiFi credentials of your WiFi network. Please notice the iBLOPPER/SPINDELMATE number as you must use the number as your username when register your account at iBLOPPER CLOUD.

Register and login

You need to register your account at iBLOPPER CLOUD and you must use the iBLOPPER/SPINDELMATE number as shown above under Setup WiFI, eg “iBLOPPER CONNECT 8799914” and only this number as username can be used. Hence, I repeat: it must be the number your iBLOPPER MATE show, and you cannot use others number/usernames at all.

If you build an The iBLOPPER/SPINDELMATE please consider Donate us!